| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(3)
Connect electrical wiring to level/temperature switch.
(4)
Install cover with screws.
e. Hydraulic Pump/Alternating Current Motor.
(1)
Place ac motor (51) on top of reservoir (38) and secure with four mounting bolts (12). Do not tighten at this
time.
(2)
Install flexible shaft coupling jaws (16) on pump and motor shafts. Ensure that flexible shaft couplings are
aligned accurately both parallel and angularly.
(3)
Secure setscrews (15) to secure flexible shaft coupling jaws on pump and motor shafts.
(4)
Position C-face adapter (17) and pump assembly (18) over flexible shaft coupling jaws (16) and aligned with
boltholes on ac motor mount. This procedure enables flexible shaft coupling jaws to engage as pump and
motor shafts are mated.
(5)
Install mounting bolts (41) to secure C-face adapter (17) to alternating current motor (51).
(6)
Connect electrical wires as tagged.
(7)
Secure ac motor mounting bolts (12).
NOTE
Remove protective caps/plugs from hydraulic lines prior to installation.
f.
Hydraulic Pipe Fittings.
(1)
Connect fitting (10) at directional control valve (22) and fitting (2) at top port of hydraulic pump (18).
(2)
Position pipe assembly and couplers (1) for installation.
(3)
Connect couplers (1) at top of fitting (10) and at fitting (2) at top of hydraulic pump (18).
(4)
Position pump fitting (19) on hydraulic pump with mounting holes aligned.
(5)
Install lockwasher-s (21) and hex head capscrews (20) and secure pump fitting (19) to pump.
2-42
|
||
|
||
