Custom Search
 
  
 
Preventive Maintenance Checks and Services
Table 2-1.
S - Semiannually A - Annually
Q - Quarterly
D - Daily W - Weekly M - Monthly
Items To Be
Interval
Item
Procedures
Inspected/
No.
D
W
M
Q
S
A
Serviced
DOORS, HATCHES, AND MANHOLES/WINDOWS GROUP- CONT
q
(3) Clean any aluminum knife-edges with paint remover
Watertight
66
(Item 28, Appendix C), if paint or similar
Hatches and
substance is present.  Use clean rag to dry knife
Scuttles CONT
edges after cleaning.
(4) Clean gaskets by scraping with hardwood block, or
rubber eraser.
(5) Clean debris from flush hatch and scuttle
recesses, if applicable.
(6) Clean old grease and foreign matter from threaded
and exposed working parts.
(7) Remove gasket if any condition in step a.(6)
exists, or if the closure panel required painting.
WARNING
Wear safety goggles when using wire brush.
(8) Using wire brush, clean corroded areas until bare
metal is exposed.
(9) Apply one coat of formula 150 primer and two
topcoats of formula 151 or equivalent paint (Items
30 and 31, Appendix C). Take care not to paint
knife-edges or gaskets.
(10) Install new gasket (if removed in step (b)(7).


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business