Custom Search
 
  
 
TM 55-1905-223-24-18-1
Table 2-2.
Troubleshooting - CONT
Malfunction
Test or Inspection
Corrective Action
ENGINE ROOM CONTROL STATION - CONT
126. No air pressure at inlet regulator when control lever in Astern Throttle
( I n i t i a l ) .  Lever at least 20 in the Astern Position from Center.
STEP 1. Repair/replace engine room control station, para. 2-118.
127. No air pressure at out regulator when control lever in Astern Throttle
( I n i t i a l ) .  Lever at least 20 in the Astern Position from Center.
STEP 1. Refer to Malfunction 105, STEP 1 and Malfunction 104, STEPS 1 and 2.
128. No air pressure at inlet (supply port #2) when control lever in Astern
T h r o t t l e .  Lever at least 20in the Astern Position from Center.
STEP 1. Refer to Malfunction 104, STEPS 1 and 2.
129. Air pressure at ahead (port #1) when control lever in Astern Throttle. Lever
at least 20 in the Astern Position from Center.
STEP 1. Repair/replace engine room control station, para. 2-118.
130. No air pressure at astern (port #3) when control lever in Astern Throttle.
Lever at least 20 in the Astern Position from Center.
STEP 1. Repair/replace engine room control station, para. 2-118.
131. No air pressure at inlet regulator when control lever in Astern Throttle.
Lever at least 20 in the Astern Position from Center.
STEP 1. Refer to Malfunction 104, STEPS 1 and 2.
132. No air pressure at out regulator when control lever in Astern Throttle.
Lever
at least 20 in the Astern Position from Center.
STEP 1. Refer to Malfunction 104, STEPS 1 and 2 and Malfunction 105, STEP 1.
133. No air pressure at inlet port of station selector valve (four-way directional
valve).
STEP 1. Check to see if air compressor is on.
Turn on air compressor, TM 55-1905-223-10.
STEP 2. Check for defective air prep system.
Repair/Replace air prep system, para. 2-121.
2-142


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business