| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
l.
Remove machine screws (14) and lockwashers (15).
m.
Remove bracket (13) and slide control cam (16) off straight shaft (12).
REPAIR
Repair at this level of maintenance is by replacement of: Motor (5), switch (1),
rotary switch (11), control cam (16), and alternating current relay (4).
ASSEMBLY
Slide control cam (16) on straight shaft (12).
a.
Attach bracket (13) with machine screws (14) lockwashers (15).
b.
Attach alternating current relay (4) with machine screws and lockwashers.
c.
Attach switches (1) with machine screws (2) and lockwashers (3).
d.
Position motor (5) with straight shaft (12) properly positioned and engaged.
e.
Attach motor with machine screws (6) and lockwashers (7).
f.
Replace rotary switch (11) and switch plate (10).
g.
h.
Install plain hexagon nut (9).
Push switch knob (8) on shaft.
i.
Test to see if this works.
j.
2-283
|
||
|
||
