| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
Firmly grasp handles (6) and pull motor controller forward as it disconnects
j.
from power jack.
Remove motor controller.
k.
REPLACEMENT
Firmly grasp handles (6) and install motor controller into enclosure.
a.
Push on handles (6) until motor controller engages with power jack.
b.
Secure dog latches (7) to motor controller.
c.
Connect electrical leads to contacts (10) on thermal release relay.
d.
(External wiring). Remove tags.
Connect electrical leads (9) to terminal blocks (8).
e.
(External wiring).
Remove tags.
Position door (2), door hinges (3) and support bracket (4) on enclosure.
f.
Install four screws (5) and secure support brackets (4) with door hinges (3)
g.
on motor controller.
Position cable harness in motor controller and secure cable with cable ties
h.
(12).
i.
Connect electrical leads from indicator lights and push switches on rear of
door at contacts (11) on motor starter. Remove tags.
Close door (2).
j.
k.
Secure door to motor controller with two latch screws (1).
On main switchboard turn ON AUX MCHRY MCC circuit breaker and remove tag,
l.
TEST
Turn ON motor controller circuit breaker.
a.
Check motor controller operation. Refer to TX 55-1905-223-10.
b.
2-746
|
||
|
||
