| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
2-326.
Repair Shower Safety Unit.
This task covers:
a. Removal, b. Repair, c. Replacement.
At Auxiliary Machinery Motor Control
Tool kit, general mechanic's,
Center press No. 1 fresh water maker
pump STOP pushbutton and set P205-4
circuit breaker to the OFF position,
Press No. 2 fresh water maker pump
STOP pushbutton and set P205-5
Piping system, potable water
circuit breaker to the OFF position,
P/N 8532028, refer to
Tag switches "Out of Service - Do Not
TM 55-1905-223-24P
Operate. "
Teflon tape, Item 5, Appendix C
a.
Close hot water supply valve (1).
Close cold water supply valve (2).
b.
Open faucets to relieve water pressure before removing
faucet.
c . Disconnect flared couplings (3).
d.
Remove shower unit (4) from shower stall.
Repair at this level of maintenance is by replacement of shower unit (4).
Apply teflon tape to all threaded connections prior to
assembly.
Position shower unit (4) in shower stall.
a.
Connect flared coupling (3) and tighten.
b.
2-976
|
||
|
||
