FIGURE 3-3. Main Machinery Room Halon Tank Service

Custom Search

SERVICE

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

Replace/Repair Halon Subsystem (Paint Locker, Main Machinery Room)

TM 55-1905-223-24-18-2

(30) Install male adapter elbow (1) on actuator.

(31) Connect hose (3) at male adapter elbow with hose connector (2).

(32) Remove tag from pull box.

b. Main Machinery Room.

(1) Disconnect hose connector (2, Figure 3-3) at male adapter tee (3) to remove hoses (1).

(2) Remove male adapter tee from actuator (4).

(3) Repeat steps (1) and (2) for other halon tank in subsystem.

FIGURE 3-3. Main Machinery Room Halon Tank Service.

NOTE

Halon tank servicing procedures are for the same paint locker and the main

machinery room.

(4) Refer to steps a.(3) through a.(29) above.

(5) Install male adapter tee (3) on actuator.

(6) Connect hoses (1) at male adapter tee with hose connectors (2).

(7) Repeat steps (5) and (6) for other halon tank in subsystem.

(8) Remove tag from pull box.

3-50