This task covers:
INITIAL SETUP :
Tool kit, general mechanic's
Hood assembly removed as specified in
paragraph 2-20 .
Bowl assembly P/N 2125-6600-L
a. Release brake by turning handle (1) clockwise until bowl assembly can be rotated by hand.
b. Turn two bowl lock screws (2) clockwise until they fit into recesses in bowl bottom (17). (One recess is
located below "O" mark of bowl bottom.) Do not apply pressure to lock screws. It may be necessary
to rotate bowl assembly by hand to align recesses with lock screws.
Both lock ring (6) and (7) are left hand thread.
c. Unscrew lock ring (6) by tapping on handle of hook wrench in clockwise direction (left hand thread).
d. Remove lock ring, regulating ring (5) and gasket (4) from bowl top (8).
e. Unscrew lock ring (7) by tapping on handle of annular wrench in clockwise direction (left hand thread).
f. Remove lock ring, bowl top (8), preformed packing (9), compensating disc (10), disc stack (11) and
distributor (12) from bowl bottom (17).