This task covers:
INITIAL SETUP :
Tool kit, general mechanic's,
Shut down - TM 55-1905-223-10
Suction and discharge valves
Torque wrench, kit
closed and tagged "Out of Service -
Do Not Operate."
Diesel fuel oil filter/separator
Warning tags, Item 1, Appendix C
a. Open vent valve (2) to relieve pressure in housing (1).
b. Open drain valve (8) and completely drain liquid from housing.
c. Remove four nuts (4), lockwashers (5) and bolts (6) to separate flange (9) assembly from drain plate.
d. Disconnect flange assembly from drain piping at union (7).
e. Remove flange (9) assembly and gasket (10).
f. Remove four nuts (15), lockwashers (16) and bolts (19) to separate flange (18) assembly from inlet
g. Disconnect flange assembly from suction piping at union elbow.
h. Remove flange (18) assembly and gasket (17).
i. Repeat steps g. through i. to remove flange (3) assembly from outlet plate.
j. Carefully secure unit to prevent shifting or movement.
k. Remove nuts (11), lockwashers (12) and bolts (13) from each of four legs (14) of unit.
l. Remove attaching harness or straps from unit.
m. Remove diesel fuel oil filter/separator.
Change 1 3-82