Replace/Repair Level Sight Indicator.

Custom Search

REPLACEMENT

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

FIGURE 3-39. Level Sight Indicator. VLI-86200-36 (Sheet 1 of 2).

TM 55-1905-223-24-18-2

3-42. Replace/Repair Level Sight Indicator. (Figure 3-39)

This task covers:

a. Removal

b. Disassembly,

c. Repair

d. Assembly

e. Replacement

INITIAL SETUP:

Tools

Equipment Condition

Tool kit, general mechanic's,

Inlet/outlet valves to /from tank

closed and tagged "Out of Service Do Not Operate."

Level of fluid in tank must be lower than indicator pick-

up.

Materials/Parts

Indicator, VLI-86501-36

Gasket P/N 86104

Float P/N 86523

Float tag P/N 86474

Warning tags, Item 1, Appendix C

REMOVAL

a. Remove flange mounting hardware and lift level sight indicator out of tank.

b. Remove flange gasket from tank flange.

DISASSEMBLY

a. Position level sight indicator on a clean flat surface.

b. Loosen and remove two retaining straps (2, Sheet 1) securing flag assembly (3) to magnetic chamber

assembly (1). Remove flag assembly.

c. Remove four hex head cap screws (9, Sheet 2) flat washers (10) and lockwashers (11) securing

magnetic chamber assembly (1) to mounting flange and float chamber assembly (4).

d. Separate magnetic chamber assembly (1) from mounting flange and float chamber assembly (4).

e. Remove gasket (13).

f. Remove cotter pins (7).

g. Separate and remove magnet assembly (6) from float rod (8).

h. Remove cotter pin (12).

3-153