Quantcast DISASSEMBLY-CONT. - TM-55-1905-223-24-18-20220

Custom Search
 
  
 
TM 55-1905-223-24-18-2
h. Indicator light (33).
(1) Tag and disconnect electrical leads and electrical insulation sleeving (34) at rear of indicator light
(33).
(2) Remove locking nut (50) from indicator light (33).
(3) Remove indicator light (33) and neon lamp (35) from rear of front panel.
i. Terminal strip (13-2).
(1) Tag and disconnect electrical leads from terminal strip (13-2).
(2) Remove two plain hex nuts (15), lockwashers (11), and machine screws (12) from terminal strip (13-
2).
(3) Remove terminal strip.
j. Terminal strip (13-1).
(1) Tag and, using a soldering iron, unsolder electrical wires and hook-up wires (14) from terminal strip
(13-1).
(2) Remove two plain hex nuts (15), lockwashers (11), and machine screws (12) from terminal strip (13-
1).
(3) Remove terminal strip.
k. Cable tie (10).
(1) Remove machine screw (12) and lockwashers (11) from cable tie (10).
(2) Remove cable tie (10).
l. Capacitor (17).
(1) Tag and, using a soldering iron, unsolder wire leads from capacitor (17).
(2) Remove capacitor.
m. Resistors (18, 19).
(1) Tag and, using a soldering iron, unsolder wire leads from resistors (18) and (19).
(2) Remove resistor (18) and resistors (19).
n. Power supply (20).
(1) Remove by pulling power supply (20) out of power supply socket (21).
(2) Remove two plain hex nuts (15), lockwashers (11), and machine screws (23) from power supply
socket (21).
3-198


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.