Quantcast ASSEMBLY-CONT. - TM-55-1905-223-24-18-20224

Custom Search
 
  
 
TM 55-1905-223-24-18-2
g. Power supply (20).
(1) Attach identification marker (24) to bracket (56).
(2) Position bracket (56) over support mount with electrical wires exposed.
(3) Install four machine screws (12), lockwashers (11), and plain hex nuts (15) and secure bracket to
support mount.
(4) Position power supply socket (21) over exposed electrical wires.
(5) Connect by soldering electrical wires to power supply socket (21). Remove tags.
(6) Position power supply socket over mounting screw holes.
(7) Install two machine screws (23), lockwashers (11), and plain hex nuts (15) and secure power socket
to support mount.
(8) Install power supply (20) into power supply socket (21).
h. Resistors (18, 19).
(1) Connect by soldering wire leads to resistor (18).
(2) Connect by soldering wire leads to resistor (19).
(3) Remove tags.
i. Capacitor (17).
(1) Connect by soldering wire leads to capacitor (17).
(2) Remove tags.
j. Cable tie (10).
(1) Position cable tie (10) over support mount.
(2) Install lockwashers (11) and machine screws (12) and secure cable tie to support mount.
k. Terminal strip (13-1).
(1) Position terminal strip over mounting screw holes.
(2) Install two machine screws (12), lockwashers (11), and plain hex nuts (15) and secure terminal strip
to support mount.
(3) Connect by soldering electrical wires and hook-up wires (14) to terminal strip (13-1).
3-202


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.