Quantcast REPAIR - TM-55-1905-223-24-18-20289

Custom Search
TM 55-1905-223-24-18-2
n. Remove element clamp plate (6).
o. Tag and disconnect electrical leads to electrical heating element (5).
p. Remove electrical heating element.
Repair at this level of maintenance is by replacement of knob (14), thermostatic control (4), indicator
light (16), electrical heating element (5).
a. Remove tags and connect electrical leads to electrical heating element (5).
b. Attach clamp plate (6) over electrical heating element with hexagon nuts (10) and flat washers (8) and
eyelet (11).
c. Install thermostatic control probe and attach with hexagon nuts (10) and cup washers (12).
d. Attach baffle (7) with hexagon nuts (10) and washers (9).
e. Remove tags and attach electrical leads to indicator light (16).
f. Push indicator light into position through opening in front panel.
g. Position temperature control (4) through opening in front panel, push on control mounting cup (13)
and attach with four machine screws (15), hexagon nuts (2) and lockwashers (3).
h. Push knob (14) onto handle of thermostatic control (4).
i. Attach case bottom (1) with six machine screws (17).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.