Quantcast Replace/Repair Rudder Indicator

Custom Search
 
  
 
3-118. Replace/Repair Rudder Indicator.
This task covers:
a. Removal
c. Repair
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
Equipment Condition
Tool kit, electrician's,
Electrical power to steering control
and autopilot system OFF and tagged
"Out of Service - Do Not Operate.'
(TM 55-1905-223-10)
Materials/Parts
Cartridge fuse P/N 420-001
Printed circuit board
P/N 130-024
Warning tags, Item 1, Appendix C
Indicator assembly repair kit
P/N 740-026
REMOVAL
a. Loosen two latching screws (3, Figure 3-105) securing starboard side access panel ,(2) to pilothouse
control console (1).
b. Remove cover plate.
c.
Tag and disconnect cable at fitting (8, Figure 3-106).
d. Remove four round head screws (9).
e. Remove rudder indicator (1).
DISASSEMBLY
a. Remove capscrews (5) and lockwasher (4) securing printed circuit board (2) to back plate (7) of
rudder indicator (1).
b. Remove fuse (3).
c.
Remove printed circuit board (2). Replace if required.


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.