This task covers:
INITIAL SETUP :
Tool kit, electrician's,
Electrical power to engine order
telegraph system secured and
tagged "Out of Service - Do Not
Operate." (TM 55-1905-223-10).
Warning tags, Item 1, Appendix C
a. Loosen captive screws (1) and open cover (2).
b. Tag and disconnect wiring from terminal boards.
c. Remove mounting screws (4).
d. Remove bridge multi-remote module (3).
Repair at this level is by replacement of bridge multi-remote module.
a. Mount bridge multi-remote module (3) on bulkhead. Secure with mounting screws (4).
b. Connect wiring to terminal boards. Remove tags.
c. Close door (2). Tighten captive screws (1).
d. Turn power to engine order telegraph system on and remove tags.