Custom Search
 
  
 
TM 55-1905-223-24-3
FIGURE 3-40. Releasing Oil Pan Gasket.
WARNING
A hoist must be solidly supporting the engine before removing the machine bolts
and hexagon capscrews from engine mounting bracket (Figure 3-38).
d. Loosen the screws (4, 6) which hold the engine mounting bracket (5) to the cross-member of the
equipment. Ensure the hoist is firmly supporting the engine. Apply only the lift required to remove the
engine supports.
e. Remove the eight capscrews (4, 6) from the engine mount bracket (5) and remove the bracket.
CAUTION
Use extreme care when releasing the oil pan gasket from the gear cover to
prevent damage to the gasket. If the gasket is damaged, the oil pin must be
removed and the gasket replaced. Refer to paragraph 3-21.
f.
Insert a feeler gauge or a shim stock between the gear cover and the oil pan gasket. Move the feeler
gauge or the shim stock back and forth to release the gasket from the gear cover (Figure 3-40).
g. Remove one assembled washer screw (8, 12, Figure 3-38) on each side of the gear cover (10), and
install the 7/16-20 x 4 inch straight headless pins (7, 13) in each location to support the cover (10)
during removal (Figure 3-41).
3-78


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business