| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
FIGURE 4-25. Removing Camshaft Gear.
(b) Push the shaft from the gear.
NOTE
If the camshaft key is marked with an arrow, record the direction in which it is pointed.
(c) Use a flat chisel and a hammer to remove the camshaft key.
CAUTION
If the inside diameter of the gear is damaged in excess of a 0.125 inch (3.175
mm) wide band, do not use the gear. This damage can result in gear movement
on the camshaft nose which can cause camshaft nose failure.
(2)
Inspect the gear and gear fit area of the camshaft.
(a) Inspect the bore of the gear for burrs or other damage.
NOTE
If burrs or other damage cannot be removed with a fine crocus cloth, replace the gear.
(b) Inspect the gear keyway for burrs.
4-65
|
||
|
||
