Custom Search
 
  
 
TM 55-1905-223-24-9
4-10. Replace/Repair Tiller Arm Assembly. (FIGURE 4-3)
This task covers:
a. Removal,
b. Repair,
c. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
TM 55-1905-223-10, Equipment shut down,
tagged "Out of Service."
Refer to the following paragraphs in this
Materials/Parts
maintenance manual:
Followup unit removed, paragraph 2-11.
Tiller arm assembly
Hydraulic cylinder assembly removed,
P/N 8562035-7
Jockey bar assembly removed, paragraph 4-9.
REMOVAL
a. Remove two hexagon nuts (2), two lockwashers (3), and two machine bolts (6). Remove tiller arm (1) from
rudder stock (5).
b. Remove woodruff key (4) and keep it for assembly.
c. Repeat steps a. and b. for the other tiller arm assembly.
REPAIR
Repair at this level is by replacement of the tiller arm assembly (1).
REPLACEMENT
a. Insert woodruff key (4) in slot on rudder stock (5).
b. Position tiller arm (1) on rudder stock and secure tiller arm with machine bolts (6), lockwashers (3), and hexagon
nuts (2).
c. Repeat steps a. and b. for the other tiller arm assembly.
d. Lubricate tiller arm assembly (LO 55-1905-223-12).
e. Restore power to pumpset.
f. Return equipment to service. Refer to TM 55-1905-223-10.
g. Remove "Out of Service - Do Not Operate" tag from circuit breaker.
4-11


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business