| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-9
SECTION IV REMARKS
STEERING GEAR
Reference
Code
Remarks
A
VISUALLY INSPECT FOR OBVIOUS DEFECTS SUCH AS LOOSE/DAMAGED
COMPONENTS AND FLUID LEAKS.
B
OPERATIONAL TEST-OBSERVE FLUID SITE GAGE LEVEL, OIL FILTER
CONDITION AND HYDRAULIC PRESSURE.
C
ALL WELD REPAIR WILL BE DONE AT H LEVEL.
D
LUBRICATE OR ADD OIL.
E
FUNCTION TO BE PERFORMED IN DRYDOCK FACILITIES.
F
USE APPROPRIATE TOOLS AND TECHNICAL DATA AT DEPOT OR CONTRACTED
REPAIR ACTIVITY TO EFFECT OVERHAUL.
G
CHECK BEARING TEMPERATURE WITH THERMOMETER AND NOT BY HAND. IF
BEARINGS ARE RUNNING HOT (OVER 180 DEG), THE CONDITION MAY BE
THE RESULT OF TOO MUCH LUBRICANT. IF CHANGING LUBRICANT DOES
NOT CORRECT CONDITION, REPLACE MOTOR.
H
NOT REPLACED AS A UNIT. REPLACEMENT IS BY INDIVIDUAL COMPONENTS.
I
LIMITED REPAIR AT DS/GS LEVEL. WHEN REPAIR/IN-DEPTH
REPAIR IS REQUIRED, REFER TO THE NICP FOR INSTRUCTIONS/APPROVAL.
J
COMPLETE REPAIR/IN-DEPTH REPAIR TO BE PERFORMED BY THE
MANUFACTURER.
K
REPAIR OF THIS ITEM IS BY REPLACEMENT.
Change 1 B-8
|
||
|
||
