Custom Search
 
  
 
TM 55-1905-242-14
0058 00
DIESELGENERATOR FUELFILTER/WATER SEPARATOR REPLACEMENT
REMOVAL
1.
CLOSE the fuel supply valve upstream of the fuel filter/water separator.
2.
Don chemical protective gloves and goggles.
3.
Position a suitable drain pan beneath the fuel filter/water separator.
4.
Label the inlet and outlet hoses (29 and 30) to permit proper installation. Remove the hoses from the elbows (31).
5.
Remove the capscrews (32) that secure the filter base (25) to the bulkhead.
6.
Remove the elbows (31) and bushings (33) from the filter base (25).
INSTALLATION
1.
Install the bushings (33) and elbows (31) in the inlet and outlet ports of the filter base (25).
2.
Align the mounting holes and secure the filter base (25) to the bulkhead with the capscrews (32).
3.
Connect the inlet and outlet hoses (29 and 30) to the elbows (31) using the labels from step 4 of Removal--Diesel
Generator Fuel Filter/Water Separator Replacement as a guide.
4.
Unscrew the filter element (24) and bowl (27) from the filter base (25).
5.
Fill the filter element (24) with clean diesel fuel to prime it.
6.
Install the filter element (24) and bowl (27) onto the filter base (25).
7.
OPEN the fuel supply valve CLOSED in step 1 of Removal--Diesel Generator Fuel Filter/Water Separator Replacement.
8.
Remove the lockouts and tagouts and run the diesel generator engine, checking for fuel leaks.
9.
If no leakage is detected, secure the diesel generator engine and dispose of used diesel fuel, cleaning solvent, and
contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0058 00-5/6 blank
0058 00-5


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business