Custom Search
 
  
 
TM 55-1905-242-14
0149 00
REMOVAL (continued)
5.
Unscrew the other end of the hose (2) from its fitting (4).
6.
Remove the fittings (3, 4, 5) or valve (6) as required for replacement.
CLEANING
1.
If not already on, don chemical protective gloves and goggles.
2.
Use cleaning solvent to clean all parts that will be reused. Dry the parts with clean wiping rags.
INSTALLATION
! CAUTION
The threaded ends of flared hydraulic fittings are not to be installed with the use of
antiseizing sealant tape or any other non-hydraulic sealant. Damage to hydraulic equip-
ment may occur.
1.
Procure new hose (2), valve (6), or fittings (3, 4, 5) as required.
2.
Wrap only the pipe threads of hydraulic fittings with antiseizing sealant tape prior to assembly. Do not use antiseizing
sealant tape or any other non-hydraulic sealant on the threads of flared hydraulic fittings.
3.
Reassemble the hose (2), valve (6), and/or fittings (3, 4, 5) in the reverse order of disassembly.
4.
Remove the lockouts and tagouts and check the operation of the system, ensuring that the steering system performs
normally and that no leakage is noted.
5.
Replenish the steering system hydraulic reservoir as required.
6.
Dispose of used hydraulic fluid, cleaning solvent, and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0149 00-2


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business