| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
DIRECT SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
VOIDS AND COMPARTMENTS, REPAIR
INITIAL SETUP:
Tools and Special Tools:
Materials/Parts:
Tool Kit, Mechanic's Rail and Marine
Gloves, Anti-Flash (Item 13, Table 2, WP 0230 00)
(Item 1, Table 1, WP 0230 00)
Goggles, Industrial, No Vents (Item 4, Table 2,
Welding Shop, Trailer Mounted (Item 7,
Table 1, WP 0230 00)
Face Shield, Industrial, Tilting (Item 10, Table 2, WP 0230
Equipment Condition:
Vessel certified safe for HOT WORK IAW
References:
FM 55-502
FM 55-502
Voids prepared for confined space entry with
TB 43-0144
Confined Space Entry Permit secured, IAW
TB 55-1900-204-24
Organizational Confined Space Entry SOP
Organizational Confined Space Entry SOP
and FM 55-502
TM 55-1905-242-24P (WP 0003)
Personnel Required:
One Certified Welder
(Trained in Confined Space Entry)
One Entry Supervisor/Attendant
Fire Watch as Required IAW FM 55-502
REPAIR
WARNING
Only properly trained personnel may enter confined spaces, or act as entry supervisors
and/or attendants for those working in confined spaces. Before entering into a confined
space, the space must be cleared for entry and a Confined Space Entry Permit must be
secured. All entry into confined spaces must be in accordance with the Organizational
Confined Space Entry Standard Operating Procedure and FM 55-502. Entry into an
uninspected confined space may result in serious injury or death.
Grinding, needling, and chipping operations produce high velocity flying debris which
can become lodged in the skin or in the eyes. Grinding, needling, and chipping in
confined spaces can result in debris flying from unexpected directions. All personnel
working in the area must wear protective eyewear, gloves, and long sleeves when per-
forming grinding, needling and chipping operations. Failure to comply can result in
serious injury or death.
Unprotected exposure to arc welding rays can cause serious eye damage and radiation
burns to the skin. Never perform arc welding operations without using appropriate eye
and skin protection.
0163 00-1
|
||
|
||
