Cleaning, Inspection, and Repair. - TM-55-1925-204-120365

Custom Search

Figure 5-105. Anchor windlass, Type VEV-16.

TM-55-1925-204-12 TUG Harbor Diesel 1200 H. P. Steel 100 Ft Design 3006 Flight One FSN 1925-375-3003 Manual

Figure 5-106. Anchor windlass and master switch.

TM 55-1925-204-12

(10) Remove bearing (7).

5-62. Motor

(11) Remove capscrews (2), retainer (6), locknut (3),

For maintenance of the anchor windlass motor see paragraph

and washer (5). Then, remove bearing (4) from its cage.

d. Cleaning, Inspection, and Repair.

(1) Wash all parts in clean fuel oil and wipe dry.

5-63. Control

(2) Inspect the bearings for wear or roughness in

For maintenance of the anchor windlass control see

rotation. Replace a defective bearing.

(3) Repack bearings with lubricant (LO 55-1925-204-

12-7), then lay aside carefully until reassembly.

5-64. Master Switch

e. Bearing and Seal Installation. Install bearings and

For maintenance of the anchor windlass master switch see

seals by reversing the procedures in c. above.

5-145