| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-2
LOCATING MAJOR COMPONENTS
This work package gives a brief description of the major components, and provides illustrations showing the location of the
components. Knowing the major components of the system is the first step to understanding system operation and mainte-
nance.
THEORY OF OPERATION
This work package contains the theory of operation for the system. Theory of operation is provided to familiarize the user
system operating principles. Once the operating principles are understood, the user is better equipped to operate, trouble-
shoot, and maintain the system.
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS
This work package describes all of the operator controls and indicators contained in the system. Use of the operator
controls and indicators is also described. Turn to the figure that shows the desired control or indicator. Note the key
number corresponding to the control or indicator. Refer to the table below the illustration and find the desired key number
in the column on the far left hand side. The center column contains the name of the control or indicator and the right hand
column briefly describes the control or indicator's function.
OPERATOR INSTRUCTIONS
Work packages are included in this manual to describe operation under usual conditions as well as operation under unusual
conditions. Prior to performing any operating procedure, perform the initial setup by obtaining the expendables, tools,
materials and other items listed prior to starting the task. Always perform the listed steps in the listed order.
TROUBLESHOOTING PROCEDURES
A troubleshooting index work package is contained in this manual to permit easy location of troubleshooting procedures.
Full directions for using the troubleshooting index and the accompanying troubleshooting procedures are contained in the
troubleshooting index work packages. The troubleshooting procedure work package(s) immediately follow the trouble-
shooting index.
ALPHABETICAL INDEX
The Alphabetical Index, located in the back of this manual, contains an alphabetical list of all sections of this manual. For
example, Location and Description of Major Components is found in section L. The work package sequence number is
found on the right side of the title where the Location and Description of Major Components is located. Turn to the work
package indicated to find the description and location of each component.
v/vi blank
|
||
|
||
