Custom Search
 
  
 
TM 55-1925-273-10-2
0156 00
ITEM INTERVAL MAN-
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR
CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
18
During
0.2
LOAD CENTER
Ensure that indicator lights, except GND
One or more
FAULT, are lit.
indicator lights not lit.
Load
Center
PHASEA
GROUNDDETECTION
PHASEB
PHASEC
PRESSTOTEST
LAPSE
EDG STARTING
BATTERIES
WARNING
Terminal
Cable
Cable
Terminal
Connection
Connection
Avoid flame, spark, and other ignition
Negative
Positive
Terminal
sources when observing battery elec-
Terminal
trolyte levels. Batteries give off fumes
that can explode. Electrolyte is an acid
and can cause chemical burns and
other injuries if it contacts skin and
Vent Caps
eyes. Wear approved goggles and a
chemical protective apron. Failure to
Batteries
comply can result in serious injury or
death.
NOTE
Top cover of battery box must be removed
to check batteries.
19
After
0.2
Batteries, Terminals, Inspect batteries, terminals, connections,
Any damage or
and Connections
cables, and vent caps for cleanliness and
failed connections.
tightness.
20
After
0.2
Terminal
Clean or tighten terminal connections as
Connections
required. Clean battery as required using
a paste of clear water and baking soda.
Rinse with clear water when finished.
21
After
0.2
Electrolyte
Check electrolyte level and check specific Hydrometer
gravity of electrolyte with hydrometer.
readings are not
Specific gravity should be 1.265.
satisfactory.
0156 00-7


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business