Tweet |
Custom Search
|
|
|
||
LUBRICANT * INTERVAL
INTERVAL * LUBRICANT
Ramp Lock Pins GAA
Superstructure Guide
Pins
GAA Splined Post Seat
Rotation Cylinder GAA
Curb Arm Assembly OE/HDO
OE/HDO Curb Cylinder Pins
(See note 2)
Curb Bracket Pin OE/HDO
(See note 2)
OE/HDO Curb Support Arm
Pivot
(See note 2)
Curb Support Arm Pin OE/HDO
(See note 2)
- KEY -
EXPECTED TEMPERATURES
LUBRICANTS
CAPACITY
INTERVALS
Above +32 F +40 F to -10 F
0F to -65 F
OE/HDO-LUBRICATING OIL,
Intervals
Engine
OE./HDO 30
OE/HDO 10
OES
given ore
in hours of
Oil Can Points
normal
operation
OES-OIL, Engine, Sub-zero
GAA-GREASE, Automotive
ALL TEMPERATURES
and Artillery
NOTES:
1.
FOR OPERATION OF EQUIPMENT IN
Copy of this Lubrication Order will remain with the
PROTRACTED COLD TEMPERATURES BELOW -
equipment at all times; instructions contained herein
10'F. Remove lubricants prescribed in the key for
are mandatory.
temperatures above - 10*F. Clean parts with
SOLVENT, dry-cleaning. Relubricate with lubricants
BY ORDER OF THE SECRETARY OF THE ARMY:
specified in the key for temperatures below - 10"F.
CREIGHTON W. ABRAMS
General, United States Army
2. OIL CAN POINTS, Every 250 hours clean and
Chief of Staff
lightly coat curb cylinder pins, curb arm and bracket
pins, support arm and pivot pins with OE/HDO.
OFFICIAL:
3.
LUBRICANTS.
The following is a list of
VERNON L. BOWERS
lubricants with the Military Symbols and applicable
Major General, United States Army
Specification numbers.
The Adjutant General
OES MIL-L-10295 GAA MIL-G-10924
OE/HDO MIL-L-2104C
DISTRIBUTION: To be distributed in accordance with DA Form 12-25D (qty rqr block No. 1129) operator
maintenance requirements for Mobile Floating Bridge.
018070-000
LO5-5420-205-12
*U. S. GOVERNMENT PRINTING OFFICE : 1988 0 - 201-419 (80010)
|
||