| Tweet |
Custom Search
|
|
|
||
 LO 55-1905-223-12
LUBRICANT INTERVAL
INTERVAL LUBRICANT
Grease Shaft
GAA
GAA
Grease Throttle
M
Linkage
M
Linkage (See
(See Note 32, 35)
Note 32, 35) (C)
(C)
GAA
Tilt Tube Grease
M
Reverse Lock
GAA
Fittings (See
M
Lever
Note 32, 33) (C)
(See Note 32, 35)
(C)
M
GAA
Grease Clamp
Screws (See
Remove Propeller GAA
Q
Note 32, 35) (C)
Grease Splined
Shaft
M
GAA
Swivel/Bracket
(See Note 32, 34)
Pin Grease
(C)
Fittings (See
M
Note 32, 33) (C)
Gear Housing
GO-80/90
M
Fill/Drain Plug
OUTBOARD MOTOR
GO-80/90 Gear Housing
(See Note 32, 36)
Vent Plug (See
(C)
Note 32, 36) (C)
TOTAL TASK-HOURS
IN TERVAL
TASK-HOURS*
M
0.2
0.5
Q
-KEY-
EXPECTED TEMPERATURES
CAPACITY
INTERVALS
ALL TEMPERATURES
GAA
Grease, automotive
As required
M-Monthly
Grease
(MIL-PRF-10924)
and artillery
Q-Quarterly
GO-80/90
Lubricating oil,
(3 months)
As required
Lubricating oil, gear, multipurpose
(SAE-J2360)
gear, multipurpose
Notes:
32. If originally issued outboard motor has been replaced, refer to OEM manual for lubrication instructions.
33. Grease motor bearings using hand lubricating gun. Apply one stroke (one quarter ounce) to grease fitting.
34. Apply grease evenly with small brush or by hand.
35. Apply lubricant sparingly with small hand brush.
36. Remove fill/drain plug. Insert grease tube nozzle into fill/drain hole. Remove gear housing vent plug. Add gear oil
until the oil starts to ooze from the vent plug hole. Install vent plug before removing grease tube nozzle. Install fill/drain
plug.
Card 13 of 41
|
||
|
||
