| Tweet |
Custom Search
|
|
|
||
 LO 55-1905-223-12
LUBRICANT INTERVAL
INTERVAL
LUBRICANT
OC
or A
Oil Filler
GO-80/90
(See Note 67)
(C)
GO-80/90
Sight Gauge
D
(See Note 67)
(C)
GO-80/90
Oil Drain Plug
A
(See Note 67)
(C)
STERN ANCHOR WINCH REDUCTION GEAR
TOTAL TASK-HOURS*
TOTAL TASK-HOURS*
INTERVAL
TASK-HOURS
INTERVAL
TASK-HOURS
D
0.1
OC
0.2
A
1.5
-KEY-
EXPECTED TEMPERATURES
CAPACITY
INTERVALS
Above +32F
+40 F to -10F
0F to -65F
(Above 0C)
(+5C to -50C) (-18C to -50C)
D-Daily
GO-80/90
Lubricating oil,
80/90
80/90
75
10 gallons
A-Annually
(SAE-J2360)
gear, multipurpose
(0-226)
(0-186)
(0-186)
(12 Months)
OC-On Condition
Notes:
67. Check oil level daily and replenish as needed to maintain level at middle of sight gauge.
LUBRICANT INTERVAL
INTERVAL
LUBRICANT
M
M
GAA
Motor Bearing
Motor Bearing
GAA
Grease Fitting
Grease Fitting
(See Note 68) (C)
B
(see Note 68)
(C)
FRH
Fill Cap (See
B
Note 69) (C)
B
FRH
Sight glass (See
Note 69) (C)
HYDRAULIC PUMP ELECTRIC
FRH
Drain and Fill
MOTOR AND RESERVOIR FOR STERN ANCHOR WINCH
Reservoir (See
Note 69) (C)
TOTAL TASK-HOURS*
INTERVAL
TASK-HOURS*
M
0.4
B
1.0
-KEY-
EXPECTED TEMPERATURES
CAPACITY
INTERVALS
ALL TEMPERATURES
GAA
Grease, automotive
As Required
Grease
B-Biennially
(MIL-PRF-10924) and artillery
(24 months)
FRH
Hydraulic fluid, rust
75 gallons
Fluid, Hydraulic
(MIL-PRF-46170) inhibited, fire resistant
(H-544)
Notes:
68. Grease daily when in use. Use hand held lubrication gun. Apply until fresh grease exudes from bearing. Wipe off
excess.
69. Open drain valve(s) and drain reservoir(s). Close drain valve(s). Remove filter cap(s) and fill reservoir(s) to the
HIGH mark on sight gauge(s) with hydraulic fluid. Install filler cap(s).
Card 29 of 41
|
||
|
||
