| Tweet |
Custom Search
|
|
|
||
 LO 55-1905-223-12
LUBRICANT INTERVAL
Fill Plug (See
Food Grade
A
Note 80) (C)
A
Drain Plug (See
Food Grade
Note 80) (C)
FOOD MIXER
TOTAL TASK-HOURS*
INTERVAL
TASK-HOURS*
0.5
A
-KEY-
EXPECTED TEMPERATURES
CAPACITY
INTERVALS
ALL TEMPERATURES
Lubricating oil,
A-Annually
(DOD-L-24651)
3 pints
Lubricating oil, food grade
(12 Months)
type II
Notes:
80. Mixer cover must be removed for access to transmission oil fill plug. Place container under drain and remove drain
plug. Drain oil from transmission. Install drain plug. Fill with clean oil. Install oil fill plug and mixer cover.
LUBRICANT INTERVAL
INTERVAL
LUBRICANT
Grease Fittings
GAA
GAA
Motor Bearings
Q
Q
(See Note 81)
(See Note 82)
(C)
(C)
W/O OWS, MWO 55-1905-223-55-6
W/ OWS, MWO 55-1905-223-55-6
DIRTY OIL PUMP
TOTAL TASK-HOURS*
INTERVAL
TASK-HOURS*
Q
0.3
-KEY-
EXPECTED TEMPERATURES
CAPACITY
INTERVALS
ALL TEMPERATURES
GAA
Grease, automotive
Q-Quarterly
As Required
Grease
(MIL-PRF-10924) and artillery
(3 months)
Notes:
81. Clean grease fitting. Apply 2 or 3 strokes of grease from a hand held lubrication gun. Do not overgrease. Wipe off
excess.
82. Motor bearings. Remove the drain plug from each end of the motor bearing housing; removal of the fan cover is
required. Attach a hand operated grease gun to one end of the motor's grease fitting. Apply 2 or 3 strokes of grease
from a hand held lubrication gun. Do not overgrease. Repeat process at the other end of the motor. Wipe away excess
grease from bearing housing drain holes and replace drain plugs. Wipe away excess grease on fittings. Clean grease
fittings.
Card 37 of 41
|
||
|
||
