| Tweet |
Custom Search
|
|
|
|
||
|
||
 TB 600-1
SECTION XV
PART IV
STOPPING A 5KW GENERATOR SET AND PERFORM AFTER OPERATION CHECKS
PERFORMANCE MEASURES
(Scored in Sequence)
PASS
FAIL
____
____
*1.
Stopping Instruction. Use stopping instructions in TM 5-6115-584-12.
*2.
Circuit Breaker. Place circuit breaker in the OFF position.
____
____
*3.
Cool Down. Allows engine to cool down at rated speed three to five minutes.
____
____
*4.
Master Switch. Place in OFF position.
____
____
*5.
Ear Protection. Remove ear protection.
____
____
*6.
Operator/Crew Preventative Maintenance Checks and Service. Uses TM 5-6115-
584-12 to perform after operation checks.
____
____
*7.
Generator Set. Visually inspect the generator set for fuel and oil leaks.
____
____
*8.
Fuel Tank. Refuel tank after completion of daily operation.
____
____
*9.
Refueling. Provide metal to metal contact between fuel container and fuel tank.
____
____
*10.
Engine. Inspect the engine for loose or missing wiring, parts, and any oil or fuel
leaks.
____
____
*11.
Oil Level. Check oil level in crank case. Add if necessary.
____
____
*12.
Fuel Filters. Inspect fuel filters for dirt, water, or sediment. Clean if necessary.
____
____
*13.
Oil Filter. Inspect for leaks.
____
____
14.
Fuel
Select
Valve.
Place
fuel
selector
valve
in
the
OFF
position.
____
____
Change 3 H-49
|
||
|
||
