| Tweet |
Custom Search
|
|
|
||
 0006 00
TM 11-5895-1847-12&P
Table 8. Operator Controls and Indicators, Communications Interface and Switchbox. (Continued)
KEY
CONTROL/INDICATOR
FUNCTION
4
J3 CONNECTOR
Provides GPS signal to DSC VHF/FM transceiver.
5
J4 - J5 CONNECTOR
Provides GPS signal to equipment to be installed at a
later date.
6
J6 CONNECTOR
Allows input of GPS differential data.
7
J7 CONNECTOR
Provides ship's power to PLGR and receives GPS data from
PLGR for distribution to J1 - J3 outputs.
8
PWR CONNECTION
Receives power from ship power source to operate PLGR.
9
PC PORT CONNECTOR
Provides data terminal interface with PLGR for
programming PLGR from data terminal.
10
GROUNDING POINT
Grounding point for grounding the interface and switchbox
to the vessel.
11
POWER SWITCH IN POWER POSITION Allows the interface and switchbox to receive power from
ship's power source and supplies regulated power to
the PLGR.
12
POWER SWITCH IN OFF POSITION
Allows the interface and switchbox to receive ship's power,
but does not allow power output to PLGR.
13
POWER SWITCH IN BYPASS POWER
Allows interface and switchbox to receive ship's power and
supplies unregulated power to the PLGR.
14
OPERATE/PROGRAM SWITCH IN
Allows GPS data from PLGR to be distributed to
OPERATE POSITION
J1 - J5 outputs.
15
OPERATE/PROGRAM SWITCH IN
Provides a direct programming link between the PLGR and a
PROGRAM POSITION
data terminal.
16
SW1
Turns GPS signal on (UP position) or off (DOWN position)
to the DSC controller.
17
SW2
Turns GPS signal on (UP position) or off (DOWN position)
to the satellite communications system.
18
SW3
Turns GPS signal on (UP position) or off (DOWN position)
to the DSC VHF/FM transceiver.
19
SW4 - SW5
Turns GPS signal on (UP position) or off (DOWN position)
for equipment to be installed at a later date.
20
SW6
Allows interface of GPS differential signal data. Switch up
for ON, switch down for OFF.
0006 00 14
|
||
|
||
