| Tweet |
Custom Search
|
|
|
||
 0008 00
TM 11-5895-1847-12&P
10. Using the cursor keys, highlight ROUTING on the CONFIGURATION menu. Press ENTER.
a.
Using the cursor keys, highlight the brackets in the DISKETTE COLUMN on the MESSAGE LOG FILES
line. Use the spacebar to mark an X in the block.
b.
Remove all X's in the REMOTE PRN column using the cursor keys and the spacebar.
c.
Using the cursor keys, highlight PATH OF MAIL. The path should read: C:SEASAT2\MSG.
d.
Using the cursor keys, highlight PATH OF EGC. The path should read: C:SEASAT2\EGC.
e.
Using the cursor keys, highlight PATH OF LOG. The path should read: C:SEASAT2\LOG.
f.
Using the cursor keys, highlight OK. Press the ENTER key. Press the ESC key twice.
g.
Using the cursor keys, highlight each set of brackets in the LOCAL PRN column on the MESSAGE LOG
FILES line. Use the spacebar to mark an X in the block.
11. All satellites channels will be automatically scanned in order to determine the best channel. The status field on the
data terminal screen will show SCAN and the login light on the INMARSAT-C transceiver will blink each time
it synchronizes with a satellite.
12. A login is automatically generated to the INMARSAT-C network. When the login is completed, the status field
on the data terminal screen should show one of the four ocean regions: West Atlantic, East Atlantic, Pacific
or Indian.
13. The first time the INMARSAT-C transceiver performs a login on the INMARSAT-C network, the transceiver is
commanded to carry out a link test, also known as automatic commissioning. This may take up to fifteen minutes
and is indicated by LINK TEST in the status field on the data terminal screen. A test distress call is included in
the link test for these systems.
NOTE
The link test distress must be initiated within one minute from the time the command to
initiate the distress is displayed on the data terminal screen.
14. When the message PLEASE INITIATE DISTRESS AS PART OF THE LINK TEST appears on the data terminal
screen press both the STOP and ALARM buttons on the INMARSAT-C transceiver at the same time for a
minimum of five seconds.
15. When the link test is completed, the message LINK TEST FINISHED and the results of the link test will be
displayed on the data terminal screen. The results of the link test will also be printed out on the parallel printer.
END OF WORK PACKAGE
0008 00 4
|
||
|
||
