| Tweet |
Custom Search
|
|
|
||
 0015 00
TM 11-5895-1847-12&P
2.
With the knob (7) side up, tilt the ribbon cartridge (12) onto the printhead plate so that it slides into the area of the
plate that is closest to the front of the INMARSAT-C printer.
NOTE
If the ribbon will not load easily, turn the blue knob slightly until the x-shaped notch on the
bottom of the ribbon cartridge aligns with the x-shaped insert on the ribbon plate.
3.
Lower the ribbon shield over the printhead (8), aligning the tabs with the inserts on the printhead plate.
NOTE
Do not remove the clear plastic ribbon shield from the ribbon cartridge.
4.
Press on the cartridge (12) until it snaps into place.
5.
Install INMARSAT-C printer access cover (5).
5
2C015-3
0015 00 4
|
||
|
||
