| Tweet |
Custom Search
|
|
|
||
 0016 00
TM 11-5895-1847-12&P
3.
Press the TOF button (3) to set the top margin at the current position.
NOTE
The SELECT light (5) must be off.
4.
Press the SELECT button (4) to select or deselect the printer.
NOTE
The SELECT light (5) shows whether the printer is ready to receive data (on) or not (off).
The ALARM light (6) indicates that paper is low or out, or that there is an internal
printer problem.
The POWER light (7) indicates that the printer is plugged in and turned on.
5.
Press the PITCH button (8) to select the size of the printed characters - 10, 12, or 17 characters per inch (cpi).
6.
Press the MODE button (9) to select the type of printing desired. The three modes available are:
a.
NLQ (Near Letter Quality): High-resolution printing in two passes of the printhead; not available at 17 cpi.
b.
UTILITY: Normal printing.
c.
HSD (High-Speed Draft): fast printing for drafts; underlining is the only printing feature available with HSD.
7.
Move the bail lever (10) towards the front or back of the printer to open and close the bail.
8.
Move the paper lever (11) towards the front or back to release or apply tension to the paper.
9.
With the paper lever engaged, turn the platen knob (12) to advance paper through the printer.
10. Press the power switch (13) to turn the printer on or off.
END OF WORK PACKAGE
0016 00 2
|
||
|
||
