| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0024 00
SETUP AUTO MARK MODE
1.
Press the DOWN ARROW key (3) to advance to SETUP AUTOMARK.
2.
Press the RIGHT ARROW key (5) to start selection flashing.
3.
Press the UP ARROW key (2) or DOWN ARROW key (3) until OFF is flashing for MODE.
2C024-26
4.
Press the RIGHT ARROW key (5) four times to save OFF and end selection flashing.
SET BULLSEYE
NOTE
The bullseye menu will only activate when waypoint data is entered.
1.
Press the DOWN ARROW key (3) to advance to SET BULLSEYE.
2.
Press the RIGHT ARROW key (5) to start selection flashing.
12C024-27
3.
Press the UP ARROW key (2) or DOWN ARROW key (3) to select flashing OFF.
4.
Press the RIGHT ARROW key (5) to save OFF and end selection flashing.
SETUP OPERATOR ID
1.
Press the DOWN ARROW key (3) to advance to SETUP OPERATOR ID.
2.
Press the RIGHT ARROW key (5) to start selection flashing.
3.
Press the UP ARROW key (2) or DOWN ARROW key (3) to enter the operator ID.
4.
Press the RIGHT ARROW key (5) to advance to the next letter/number position after each letter/number
is entered.
5.
Press the UP ARROW key (2) or DOWN ARROW key (3) to change the letter/number.
6.
Continue until the complete operator ID is entered.
7.
Press the RIGHT ARROW key (5) until the double arrow symbol appears in the right lower corner of the display
to the left of P.
0024 00 7
|
||
|
||
