| Tweet |
Custom Search
|
|
|
||
 0031 00
TM 11-5895-1847-12&P
2.
Press the UP ARROW KEY (2) or DOWN ARROW key (3) to select USER DSC ID with the selection bar.
USER SETUPS
CLOCK
VIEWING ANGLE
USER DSC ID
2C031-3
NOTE
The lower two lines of the display will show dashes unless a name and number have been
previously entered. A name must be entered on the second line from the bottom of the
display and the ID number must be entered on the lower line. A name may be one or more
alphanumeric characters but the ID number must be nine digits.
3.
Press the ENT key (4). The DSC ID, NAME/NUMBER page will appear.
USER DSC ID
NAME/NUMBER
2C031-4
4.
To enter a letter into the name line of the display, press the appropriate number key. Press the key repeatedly until
the desired letter or the number appears in the character position. Then, press the next key. The entry point will
move to the next position automatically. If more than one letter from the same key must be entered in succession,
press the RIGHT ARROW key (6) to move the entry point to the next character position. To correct an entry, press
the LEFT ARROW key (5) to backspace. When the name is complete press the DOWN ARROW key (3) to move
the entry point to the ID number line.
USER DSC ID
NAME/NUMBER
LCU_2034
2C031-6
5.
Press the appropriate number keys to enter the Ship Station Identification number. To correct an entry, press the
LEFT ARROW key (5) to backspace. To skip a digit, press the RIGHT ARROW key (6).
USER DSC ID
NAME/NUMBER
LCU_2034
366081144
2C031-7
0031 00 2
|
||
|
||
