| Tweet |
Custom Search
|
|
|
||
 0032 00
TM 11-5895-1847-12&P
2.
Press the DOWN ARROW key (6) until SECURITY CODE is highlighted.
USER SETUPS
NUMBER PEOPLE
NMEA POSITION
SECURITY CODE
2C032-3
3.
Press the ENT key (10). A software version number appears on the bottom line of the display. The letter "M" after
the four numerical digits denotes that the transceiver has been manufactured to military specification. Absence of
the letter "M" denotes that the transceiver has not been manufactured to military specification.
SECURITY CODE
____
VER: 9720M-6N
2C032-4
POWER ON AND VOLUME
1.
Rotate the VOLUME KNOB (1) clockwise to turn the power on.
ROSS DSC500
SELF TEST
IN PROGRESS
2C032-5
2.
Rotate the knob further clockwise to adjust the audio output level. If a self-test fails, a message describing the
failure will be displayed.
POWER OFF
1.
Rotate the knob further counterclockwise to decrease the audio output level.
2.
Rotate the VOLUME KNOB (1) counterclockwise until it clicks to turn the power off. The display becomes blank
and the transceiver does not receive any calls. Memory is protected by an internal battery.
SQUELCH
1.
Rotate the SQUELCH KNOB (2) counterclockwise until background noise is heard.
2.
Adjust the knob clockwise until slightly beyond the point where noise is muted.
0032 00 2
|
||
|
||
