| Tweet |
Custom Search
|
|
|
||
 0032 00
TM 11-5895-1847-12&P
3.
If the transceiver has another mode active, the scan menu for example, two options are available to select a
new channel.
HIGH
70
USA
15:15:33
UT
2C032-8
a.
Pressing the functions keys for the active mode returns to the Primary mode with the current working channel
active. Press the arrow keys or two number keys to select the desired channel.
b.
Also, in most menu display modes, pressing two number keys corresponding to a desired channel changes to
the Primary mode with the new channel active.
TRANSMITTING
1.
To transmit, hold the microphone near your lips and press the PUSH TO TALK button (7) on the microphone. .
2.
If a bad antenna condition is detected, the alarm message ANT FAULT appears in the lower line of the display as
long as transmission is attempted. Note that the transceiver continues to attempt transmission even though the
alarm message appears.
HIGH
16
XMIT
USA
ANT FAULT
2C032-9
USA OR INTERNATIONAL FREQUENCIES
1.
The DSC may be operated on either the USA or INTERNATIONAL FREQUENCIES. The current selection
appears in the Primary mode display.
HIGH
70
USA
15:15:33
UT
2C032-8
2.
To change the current frequency set, press the FNC key (4) and U/I key (8) while the Primary mode is active. The
annunciator toggles between USA and INTL each time the keys are pressed.
HIGH
70
INTL
15:15:33
UT
2C032-10
0032 00 4
|
||
|
||
