| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0033 00
5.
Press the CLR key (7). The INITIALIZE page will appear to change the time, date, day of week, or local offset
from UTC,. The UTC time, date and day of the week appear in the lower two lines of the display. The LOCAL
SET line in the display show the offset from UTC to local time as + or D the number of hours from your location
to the Greenwich meridian. The + or D sign will be flashing.
INITIALIZE
LOCAL SET -05
17:09:00 UTC
03-30-99 TUE
2C033-6
6.
Press the UP ARROW key (2) to change the sign.
7.
Press the RIGHT ARROW key (6) to select the next digit in the offset field. Enter the correct number of hours.
As each digit is entered, the flashing digit will move to the next position.
INITIALIZE
LOCAL SET -05
17:20:00 UTC
03-30-99 TUE
2C033-7
NOTE
If this is the first time you have set the clock, you may want to set the time several minutes
ahead to allow for following the instructions.
8.
To correct an entry, press the LEFT ARROW key (5) to backspace.
9.
To skip a digit, press the RIGHT ARROW key (6). Enter the correct UTC time in hours and minutes. As each digit
is entered, the flashing digit will move to the next position.
10. After the time is set, the flashing digit will move to the first digit on the lower line of the display. Press the
appropriate number keys to enter the date.
11. When the date is complete, press the UP ARROW key (2) repeatedly to select the day of the week.
12. When all information is displayed correctly, press the ENT key (4). The clock will be started at 00 seconds and
the CLOCK display will appear. If desired, the clock may be set accurately to the second by setting the time a
minute ahead and then pressing the ENT key (4) at 00 seconds on the time reference.
PM
12:20
42
03/30/99
TUE
2C033-8
13. The UTC time will be corrected by the AN/PSN-11(V)1 PLGR if the system is operational.
14. Press the 16 key to return to the Primary mode.
0033 00 3
|
||
|
||
