| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0036 00
37. The meaning of each function is as follows;
A ----------- SIGNAL MONITOR VOLUME MINIMUM/MAXIMUM
B ----------- ALARM VOLUME MINIMUM/MAXIMUM
C ---------- NUMBER OF CHARACTER/LINE (MESSAGE PRINT OUT ONLY. FOR USER
SETTING 35 CHARACTERS /LINE IS ALWAYS USED.)
D ----------- KEY PRESS CONFIRMATION BEEP ON/OFF
E ----------- NAVIGATION DATA INPUT ON/OFF (SEE NOTE 1)
NEMA ---- NATIONAL MARINE ELECTRONICS ASSOCIATION
CIF -------- FURUNO COMMUNICATION INTERFACE
F ---------- TIME FROM CONNECTED NAVIGATION EQUIPMENT ON/OFF
G ---------- AUTOMATIC OR MANUAL STATION SELECTION
H ---------- PRINTING OF CHARACTER ERROR RATE ON/OFF
38. Make necessary changes with the ACCEPT and REJECT keys. After making selections, press the ENT key.
NOTE
When entry of "NMEA-0183" or "CIF" data is accepted, the receiver provides: time,
heading, position, speed, bearing, wind direction, and speed. Water temperature, depth
and ocean current direction and speed, as available, will be printed automatically at a
preset time interval.
In order to activate the manual station selection, "G" should be entered in this C:
set function mode.
Error rate, message reception status (duplicate reception, etc.) may be added to each
message received. You may activate the comment printout to check signal quality by
entering "H". To delete it, enter "H".
39. Select MENU-D: PRINT SELECTED ID on the main menu. The receiver prints out station ID's and message
categories, preceded by time information by hour, for messages received within the last 66 hours. An example
printout is shown below.
Nav. print ready.
----------------------End of print ID-------------------
(Passed time : Received ID code)
00:AF00
00:BB01
01:LL01
02:CD01
02:ED00
04:DD01
-------------------------Print ID------------------------
2C036-12
40. After printing out ID's, control is returned to the receiving mode.
0036 00 13
|
||
|
||
