| Tweet |
Custom Search
|
|
|
|
||
|
||
 TM 11-5895-1847-12&P
0099 00
INSTALL AUTO SWITCH TO INMARSAT-C PRINTER CABLE
1.
Plug the 25-pin port plug (9), tagged PRNSB/INMARSAT PRN, into the C port of the INMARSAT-C data
terminal/INMARSAT-C printer auto switch (7).
2.
Tighten the mounting screws (8) on each side of the connector shell attached to port C.
3.
Position auto switch (7) and press down to attach to hook and pile tape.
4.
Install 36-pin parallel port plug (6), tagged PRNSB/INMARSAT PRN, to the back of the printer (4). Clamp the
wire clips on the plug (5).
5.
Position printer (3) and press down to attach printer with hook and pile tape.
6.
Place strap around printer (3) and attach quick release buckle (5).
7.
Install cable ties to secure printer cable to other cables.
8.
Turn power on at power strip located behind the 9701 console.
END OF WORK PACKAGE
0099 00 3/4 blank
|
||
|
||
