| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0113 00
INSTALL SERIAL PRINTER INK CARTRIDGE
1.
Obtain replacement ink cartridge (7) and with the knob side up, tilt the ink cartridge (7) onto the printhead (3)
plate so that it slides into the area of the plate that is closest to the front of the serial printer.
NOTE
If the ribbon will not load easily, turn the blue knob slightly until the x-shaped notch on the
bottom of the ribbon cartridge aligns with the x-shaped insert on the ribbon plate.
2.
Lower the ink cartridge (7) over the printhead (3), aligning the tabs with the inserts on the printhead plate.
NOTE
Do not remove the clear plastic ribbon shield from the ribbon cartridge.
3.
Press down on the ink cartridge until it snaps into place (7).
4.
Install serial printer access cover (2).
5.
Turn power switch (1) to ON position.
END OF WORK PACKAGE
0113 00 3/4 blank
|
||
|
||
