| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0121 00
{1} Turn mounting screws (13) clockwise to tighten printer cable (12) on receptacle.
{2} Connect printer cable (12).
e.
Connect ground wire (8) on back of INMARSAT-C transceiver (2).
{1} Install wire (8) on ground stud (11).
{2} Install two washers (10) and nut (9) on ground stud (11) on back of INMARSAT-C transceiver (2).
f.
Connect the power cable (7) on X2 cable receptacle on back of INMARSAT-C transceiver (2).
g.
Connect X1 antenna coaxial connector (6) on antenna receptacle on back of INMARSAT-C transceiver (2).
h.
Tighten four camlock fasteners (5) (two each side of INMARSAT-C transceiver) that secure the
INMARSAT-C transceiver (2) to the mounts on the inside of the 9701 console (1).
1
5
2
3
4
2C106-1
{1} Align four camlock fasteners (5) (two on each side of INMARSAT-C transceiver) with the mounts on
the inside of the 9701 console (1).
{2} Tighten camlock fasteners (5). Turn counterclockwise.
i.
Install eight mounting screws (3) that mounts the INMARSAT-C transceiver (2) in the 9701 console (1).
{1} Align the faceplate (4) of the INMARSAT-C (2) with the mounting holes of the 9701 console (1).
{2} Install eight screws (3).
4.
Install MF/HF DSC watch receiver. (WP 0120 00)
END OF WORK PACKAGE
0121 00 5/6 blank
|
||
|
||
