INSTALL MF/HF DSC CONTROLLER - CONTINUED - TM-11-5895-1847-12-P0560

Custom Search

INSTALL MF/HF DSC CONTROLLER - CONTINUED

TM-11-5895-1847-12-P LCU 2000 Global Maritime Distress and Safety System (GMDSS) LSV (1915-01-153-8801) LCU 2000 (1905-01-154-1191) Manual

INSTALL MF/HF DSC CONTROLLER - CONTINUED

0123 00

TM 11-5895-1847-12&P

{1} Turn mounting screws (32) clockwise to tighten cable (31) onto receptacle.

{2} Connect cable (31).

Connect the printer cable (29) to the receptacle on back of the MF/HF DSC controller (22).

{1} Turn mounting screws (30) clockwise to tighten cable (29) onto receptacle.

{2} Connect printer cable (29).

CAUTION

When connecting the electrical connectors to the back of the MF/HF DSC controller,

use extreme caution. Push the connectors straight in. Do not twist or turn the

connector in any way. Do not break or damage any wires attached to the connectors.

Failure to comply could result in equipment/connector damage and/or failure.

Connect the NMEA SEA DATA electrical connector (28) to the receptacle on back of the MF/HF DSC

controller (22).

{1} Grasp the connector (28) and push straight inward to connect.

{2} Connect electrical connector (28) to receptacle.

Connect remote alarms electrical connector (27) to receptacle on back of MF/HF DSC controller (22).

{1} Grasp the connector (27) and push straight inward to connect.

{2} Connect electrical connector (27) to receptacle.

Connect small electrical connector (26) to receptacle on back of MF/HF DSC controller (22).

{1} Grasp the connector (26) and push straight inward to connect.

{2} Connect electrical connector (26) from the receptacle.

0123 00 8