INSTALL COMMUNICATIONS INTERFACE AND SWITCHBOX

Custom Search

REMOVE COMMUNICATIONS INTERFACE AND SWITCHBOX

TM-11-5895-1847-12-P LCU 2000 Global Maritime Distress and Safety System (GMDSS) LSV (1915-01-153-8801) LCU 2000 (1905-01-154-1191) Manual

UNIT LEVEL MAINTENANCE LCU 2000 GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM REPLACE COMMUNICATIONS INTERFACE AND SWITCHBOX MOUNT

TM 11-5895-1847-12&P

0126 00

10. Unplug the cable plug (13) from the port (14) of the interface and switchbox (3) back.

11. Loosen the connector shell of the cable plug (15), tagged PLGRSB-J2/GMDSS J3 C, on the back of the interface

and switchbox (3).

12. Unplug the cable plug (15) from the port (16) of the interface and switchbox (3) back.

13. Detach 2 antenna coaxial leads (8) and (9) from the interface and switchbox (3) back.

14. Remove 4 bolts (10), lock washers (11), and flat washers (12) from mounting bracket (13).

INSTALL COMMUNICATIONS INTERFACE AND SWITCHBOX

Position and install interface and switchbox on mounting bracket (13) with four bolts (10), lock washers (11), and

flat washers (12).

Attach two antenna coaxial leads (8) and (9) to the interface and switchbox (3) back.

Plug the cable plug (13) into the port (14) of the interface and switchbox (3) back.

Tighten the connector shell of the cable plug (13), tagged PLGRSB-J1/GMDSS J3 HF, on the back of the interface

and switchbox (3).

Plug the cable plug (15) into the port (16) of the interface and switchbox (3) back.

Tighten the connector shell of the cable plug (15), tagged PLGRSB-J2/GMDSS J3 C, on the back of the interface

and switchbox (3).

Plug the PLGR cable plug (6) into port (7) of the interface and switchbox (3) back.

Tighten the connector shell of the PLGR cable plug (6), tagged PLGRSB-J7/PLGR, on the back of the interface

and switchbox (3).

Plug the VHF/FM DSC transceiver cable plug (4) into the port (5) of the interface and switchbox (3) back.

10. Tighten the connector shell of the VHF/FM DSC transceiver cable plug (4), tagged PLGRSB-J3/ROSS DSC, on

the back of the interface and switchbox (3).

11. Plug the power cable plug (1) into the port (2) of the interface and switchbox (3) back.

12. Tighten the connector shell of the power cable plug (1), tagged GMDSS POWER, on the back of the interface and

switchbox (3).

13. Turn power on at the GMDSS DC converter. Place the switch in the ON (up) position.

14. Turn power on at the GMDSS power supply. Place the switch in the ON (up) position.

END OF WORK PACKAGE

0126 00 3/4 blank