| Tweet |
Custom Search
|
|
|
|
||
|
||
 0133 00
TM 11-5895-1847-12&P
6.
Remove winghead screw (6), lock washer (7), and flat washers (8) from NAVTEX receiver (2) back and remove
ground wire (9).
11
NA
VT
EX
RE
CE
IVE
R
2
SA
R
PA
PE
LO R
CK
10
PO
WE
R
DIM
ME
NU
EN
T
RE
JE
CT
AC
CE
PT
2c134-2
7.
Loosen knurled knob (10) on each side of NAVTEX receiver (2) and remove from mount (11).
INSTALL NAVTEX RECEIVER
1.
Position NAVTEX receiver (2) on mounting bracket (11) and secure by tightening knurled nut (10) on each side.
2.
Plug coaxial leads tee fitting (4) into the port (5) on the NAVTEX receiver (2) back.
3.
Tighten the connector shell of the antenna coaxial leads tee fitting (4) on the NAVTEX receiver (2) back.
4.
Plug the NAVTEX-PWR/DC POWER cable plug (1) into the port (3) of the NAVTEX receiver (2) back.
5.
Tighten the connector shell NAVTEX-PWR/DC POWER cable plug (1) on the NAVTEX receiver (2) back.
6.
Install lock washer (7), flat washer (8), ground wire (9), and flat washer (8) on winghead screw (6) and install on
NAVTEX receiver (2) base and tighten.
END OF WORK PACKAGE
0133 00 2
|
||
|
||
