| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0135 00
4.
Plug the 25-pin port plug (10), tagged IBM-TERM/PRNSB, into the port of the INMARSAT-C data terminal.
9
10
8
6
7
5
BACK VIEW
2C101-3
5.
Tighten the mounting screw (9) on each side of the parallel connector shell attached to the INMARSAT-C
data terminal.
6.
Attach peel and stick hook and pile tape to underside of AC adapter and attach behind 9701 power strip.
7.
Install cable ties around cables and plug AC adapter cable into 9701 power strip.
8.
Plug the 9-pin plug (8), tagged GMDSS-J4/IBM-TERM, into the port of the INMARSAT-C data terminal.
9.
Tighten the mounting screw (7) on each side of the serial connector shell of the J4 cable plug.
10. Install AC adapter cable plug (5) into the power jack (6).
11. Place data terminal aft on plate and press down on front and back of data terminal to attach terminal to hook and
pile tape.
12. Turn power on at power strip located behind the 9701 console.
END OF WORK PACKAGE
0135 00 3/4 blank
|
||
|
||
