| Tweet |
Custom Search
|
|
|
||
 0143 00
TM 11-5895-1847-12&P
a.
Loosen screw (21) and insert PLGRSB-PWR/DC POWER cable negative wire (22) in junction box terminal
block (6). Tighten screw.
b.
Loosen screw (23) and insert PLGRSB-PWR/DC POWER cable positive wire (24) in junction box terminal
block (6). Tighten screw.
c.
Connect PLGRSB-PWR/DC POWER cable ground wire (25) to ground stud (17).
3.
Connect J5 cable (11) from junction box terminal block (6).
a.
Loosen screw (12) and insert J5 cable negative wire (13) in junction box terminal block (6). Tighten screw.
b.
Loosen screw (14) and insert J5 cable positive wire (15) in junction box terminal block (6). Tighten screw.
c.
Connect J5 cable ground wire (16) to ground stud (17). Install nut (18) and washer (19). Tighten nut.
4.
Connect GMDSS POWER (5) cable to junction box terminal block (6).
a.
Loosen screw (7) and insert GMDSS POWER cable negative wire (8) in junction box terminal block (6).
Tighten screw.
b.
Loosen screw (9) insert GMDSS POWER cable positive wire (10) in junction box terminal block (6).
Tighten screw.
5.
Install cover (4) on junction box (2).
1
2
27
3
2C138-3
0143 00 6
|
||
|
||
