| Tweet |
Custom Search
|
|
|
||
 0148 00
TM 11-5895-1847-12&P
2.
Loosen the connector shell of the J4 cable plug (2), tagged GMDSS-J4/IBM-TERM, on the back of the
9701 console.
4
5
6
7
8
9
BACK VIEW
2C102-2
3.
Unplug the J4 cable plug (2) from the port (3) of the 9701 console back.
4.
Remove screw (4), lock washer (5), and washer (6) from bracket (7) located on the back of each side of
data terminal.
5.
Lift up on front of data terminal to release terminal from hook and pile tape.
6.
Slide data terminal forward to access rear of terminal.
7.
Loosen the mounting screw (9) on each side of the connector shell of the J4 cable plug (9), tagged
GMDSS-J4/IBM-TERM.
8.
Unplug the J4 cable plug (9) from the port of the data terminal.
9.
Remove nylon cable ties securing J4 external cable to other cables.
10. Remove J4 cable.
INSTALL J4 EXTERNAL CABLE
1.
Plug the J4 plug (2), tagged GMDSS-J4/IBM-TERM, into the port (3) of the 9701 console back.
2.
Tighten the connector shell of the J4 cable plug (2).
3.
Plug the J4 cable plug (9), tagged GMDSS-J4/IBM-TERM, into the port of the INMARSAT-C data terminal.
4.
Tighten the mounting screw (8) on each side of the serial connector shell of the J4 cable plug (9).
5.
Install nylon cable ties and secure J4 external cable to other cables.
6.
Slide data terminal aft.
7.
Press down on front and back of data terminal to attach terminal to hook and pile tape.
0148 00 2
|
||
|
||
