| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0149 00
3.
Loosen screw (14) on junction box terminal block (15) and insert J5 cable positive wire (16). Tighten screw (14).
4.
Remove nut (10) and washer (11) from ground stud (12) and install J5 cable ground wire (13). Install washer (11)
and nut (10) on ground stud (12). Tighten nut (10).
5.
Tighten screws (8) on junction box cable clamp (9).
6.
Secure wires in junction box with nylon cable ties.
7.
Align cover (6) on junction box (15)and tighten screw (4) located on top of junction box (15).
8.
Plug the J5 cable plug (2), tagged GMDSS-J5/DC POWER, into the J3 connector (3) on the back of the
9701 console.
9.
Tighten the connector shell of the J5 cable plug (2), tagged GMDSS-J5/DC POWER, on the back of the
9701 console.
10. Install nylon cable ties to secure J5 cable.
11. Turn power on at the GMDSS DC converter. Place the switch in the ON position.
12. Turn power on at the GMDSS power supply. Place the switch in the ON position.
13. Turn switch S1 (1) to ON (up) position on back of 9701 console.
END OF WORK PACKAGE
0149 00 5/6 blank
|
||
|
||
